Karsten Durst

Prof. Dr.-Ing. Karsten Durst

Fachgebietsleiter

+49 6151 16-20551
+49 6151 16-20555

Alarich-Weiss-Straße 2
64287 Darmstadt

Raum: L2|01 60

zur Liste

Current research topics

• Microstructure-mechanical property relationship for metallic materials

• Nanoindentation, Focused Ion Beam, in-situ mechanical testing

• Nanocrystalline materials, High temperature alloys, Carbon coatings and thin films

• Scale bridging in mechanical properties, size effects

• Deformation and damage mechanisms

Education and positions

1999 Diplom-Ingenieur in Material Science and Engineering (MSE), Universität des Saarlandes,

06/2000 – 02/2001 Research stay (DFG graduate school) at Oak Ridge National Laboratory (ORNL) and University of Tennessee (UTK), Knoxville, TN, USA, with Prof. Dr. G.M. Pharr

03/2003 Dr.-Ing. (PhD) in MSE, Universität des Saarlandes, with Prof. Dr. H. Vehoff

01/2003 – 04/2013 Group leader micromechanics at the Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Department MSE, with Prof. Dr. M. Göken.

09/2006 – 12/2006 Research stay (DFG) at ORNL and UTK, Knoxville, TN, USA, with Prof. Dr. G.M. Pharr

07/2010 Habilitation in MSE, Department MSE, FAU

08/2010 Masing-Award, Deutsche Gesellschaft für Materialkunde (DGM), 2009

05/2013- Full professor at Technische Universität Darmstadt, FB Materialwissenschaft, Head of Physical metallurgy (PhM)

Publications

2015

95. A Klausmann, K Morita, KE Johanns, C Fasel, K Durst, G Mera, R Riedel, I Ionescou: Synthesis and high-temperature evolution of polysilylcarbodiimide-derived SiCN ceramic coatings, Journal of the European Ceramic Society 35 (14), 2015, 3771-3780

94. P. Malchow, KE Johanns, D Möncke, S Korte-Kerzel, L Wondraczek, K. Durst: Composition and cooling-rate dependence of plastic deformation, densification, and cracking in sodium borosilicate glasses during pyramidal indentation, Journal of Non-Crystalline Solids 419, 2015,97-109

93. Z Sun, S Van Petegem, A Cervellino, K Durst, W Blum: Dynamic recovery in nanocrystalline Ni, Acta Materialia 91, 2015, 91-100

92. H. ur Rehman, K Durst, S Neumeier, AB Parsa, A Kostka, G Eggeler,M. Göken: Nanoindentation studies of the mechanical properties of the μ phase in a creep deformed Re containing nickel-based superalloy Materials Science and Engineering: A 634, 202-208

91. W Blum, P Eisenlohr, M Prell, K Durst: Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests KOVOVE MATERIALY-METALLIC MATERIALS 53 (4), 2015, 199-205

90. C Choi, DH Lee, B Ahn, K Durst, M Kawasaki, TG Langdon, J Jang: Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion: Scripta Materialia 94, (2015) 44-47, doi:10.1016/j.scriptamat.2014.09.014

89. K Durst, V Maier: Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals: Current Opinion in Solid State and Materials Science (2015)

2014

88. C Schmid, H Hetzner, S Tremmel, F Hilpert, K Durst: Tailored Mechanical Properties and Residual Stresses of aC: H: W Coatings, Advanced Materials Research 996 (2014) 14-21.

87. B Merle, V Maier, K Durst: Experimental and theoretical confirmation of the scaling exponent 2 in pyramidal load displacement data for depth sensing indentation, Scanning (2014).

86. F Haag, D Beitelschmidt, J Eckert, K Durst: Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending–A nanoindentation and atomic force microscopy study, Acta Materialia 70 (2014) 188-197.

85. H Hetzner, C Schmid, S Tremmel, K Durst, S Wartzack: Empirical-Statistical Study on the Relationship between Deposition Parameters, Process Variables, Deposition Rate and Mechanical Properties of aC: H: W Coatings, Coatings 4 (4), (2014) 772-795, doi:10.3390/coatings4040772

84. V Maier, C Schunk, M Göken, K Durst: Microstructure-dependent deformation behaviour of bcc-metals–indentation size effect and strain rate sensitivity, Philosophical Magazine, (2014) 1-14

83. J Ast, T Przybilla, V Maier, K Durst, M Göken: Microcantilever bending experiments in NiAl–Evaluation, size effects, and crack tip plasticity, Journal of Materials Research 29 (18), (2014) 2129-2140, DOI: http://dx.doi.org/10.1557/jmr.2014.240

2013

82. Depner-Miller, U., Ellermeier, J., Scheerer, H., Oechsner, M., Bobzin, K., Bagcivan, N., Brögelmann, T., Weiss, R., Durst, K., Schmid, C: Influence of application technology on the erosion resistance of DLC coatings, Surface and Coatings Technology 237 (2013) pp. 284

81. Ahmed, F., Krottenthaler, M., Schmid, C., Durst, K.: Assessment of stress relaxation experiments on diamond coatings analyzed by digital image correlation and micro-Raman spectroscopy, Surface and Coatings Technology 237 (2013) pp. 255

80. Wheeler, J.M., Maier, V., Durst, K., Göken, M., Michler, J.: Activation parameters for deformation of ultrafine-grained aluminium as determined by indentation strain rate jumps at elevated temperature, Materials Science and Engineering A 585 (2013) pp. 108

79. Ast, J., Durst, K: Nanoforming behaviour and microstructural evolution during nanoimprinting of ultrafine-grained and nanocrystalline metals, Materials Science and Engineering A 568 (2013) pp. 68

78. Maier, V., Merle, B., Göken, M., Durst, K.: An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures, Journal of Materials Research 28 (9) (2013) pp. 1177

77. Krottenthaler, M., Schmid, C., Schaufler, J., Durst, K., Göken, M : A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation, Surface and Coatings Technology 215 (2013) pp. 247

76. Schmid, C., Maier, V., Schaufler, J., Butz, B., Spiecker, E., Meier, S., Göken, M., Durst, K.: Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy, Thin Solid Films 528 (2013) pp. 263

75. Hay, J., Maier, V., Durst, K., Göken, M Strain-rate sensitivity (SRS) of nickel by instrumented indentation, Conference Proceedings of the Society for Experimental Mechanics Series 6 (2013) pp. 47

2012

74. R. Meszaros, B. Merle, M. Wild, K. Durst, M. Göken, L. Wondraczek: Effect of thermal annealing on the mechanical properties of low-emissivity physical vapor deposited multilayer-coatings for architectural applications. Thin Solid Films, 520, 2012, 7130-7135

73. H. Hetzner, J. Schaufler, S. Tremmel, K. Durst, S. Wartzack: H. Hetzner, J. Schaufler, S. Tremmel, K. Durst, S. Wartzack: Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests, Surface and Coatings Technology, 212, 2012, 46-54

72. J. Schaufler, C. Schmid, K. Durst*, M. Göken: Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending, Thin Solid Films Letters, 522, 2012, 480-484

71. M. Krottenthaler, C. Schmid, J. Schaufler, K. Durst*, M. Göken: A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation, Surface and Coatings Technology, in press, 2012

70. H. ur Rehman, F. Ahmed, C. Schmid, J. Schaufler, K. Durst*: Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and Cohesive Zone FEM modeling, Surface and Coatings Technology, 207, 2012, 163-169

69. H. Hetzner, J. Schaufler, S. Tremmel, K. Durst, S. Wartzack: Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests, Surface and Coatings Technology, 206 (23), 2012, 4864-4871

68. C. Schmid, V. Maier; J. Schaufler; B. Butz; E., Spiecker; S. Meier; M. Göken; K. Durst: Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy, Surface and Coatings Technology, in press 2012

67. K. Durst, H. Ur Rehman, B. Merle: Comment to paper “Penetration depth and tip radius dependence on the correction factor in nanoindentation measurements” by J.M. Meza et al. [J. Mater. Res. 23(3), 725 (2008)], Journal of Materials Research 27(8), 2012, 1205-1207.

66. H. Hetzner, J. Schaufler, Pejić, G., S. Tremmel, K. Durst, S. Wartzack: Investigation on the tribological-mechanical behaviour of amorphous carbon coatings by load-scanning tests | [Untersuchung des tribologisch-mechanischen Verhaltens amorpher Kohlenstoffschichten mittels Load Scanner], Materialwissenschaft und Werkstofftechnik, 2012 43 (3), 226-233

65. B. Merle, V. Maier, M. Göken, and K. Durst, Experimental determination of the effective indenter shape and ε-factor for nanoindentation by continuously measuring the unloading stiffness. Journal of Materials Research, 2012. 27(1): p. 214-221.

64. J. Schaufler, K. Durst*, T. Haas, R. Nolte, H.W. Höppel, and M. Göken, The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens. International Journal of Fatigue, 2012. 37, 1-7.

63. F. Igbal, J. Ast, M. Göken, K. Durst*: In-situ micro-cantilever tests to study fracture properties of NiAl single crystals, Acta Materialia 60 (2012), 1193-1200

2011

62. F. Ahmed, K. Bayerlein, S. Rosiwal, M. Göken, K. Durst*: Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-raman spectroscopy and analytical modelling. Acta Materialia 59(11) (2011) 5422-5433

61. V. Maier, K. Durst*, J. Mueller, B. Backes, H.W. Höppel, M. Göken: Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al; J. Mater. Res. 26 (2011) 1421-1430

60. M.A. Lodes, A. Hartmaier, M. Göken, K. Durst*: Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations Acta Materialia 59(11) (2011) 4264-4273

59. A. Böhner, V. Maier, K. Durst, H.W. Höppel, M. Göken: Macro- and nanomechanical properties and strain rate sensitivity of accumulative roll bonded and equal channel angular pressed ultrafine-grained materials. Advanced Engineering Materials, 13(4) (2011) 251-255.

58. M.H. Rausch, A. Leipertz, A.P. Fröba, P. Jakobs, K. Durst, M. Göken: Studies on the origin of dropwise condensation of steam on ion implanted metallic surfaces. [Untersuchungen zur Ursache der Tropfenkondensation von Wasserdampf an ionenimplantierten Metalloberflächen] Chemie-Ingenieur-Technik, 83(4) (2011) 545-551

57. N.M. Jennett, M. Goken, K. Durst: Nano-mechanical testing in materials research and development. Philosophical Magazine, 91(7-9) (2011) 1035-1036.

56. L. Zirkel, V. Maier, K. Durst, H. Münstedt: Compression moduli of foamed films of fluorinated ethylene propylene copolymers determined by nanoindentation. Polymer Testing 30(3), (2011), 286-293.

55. J. Schaufler, G. Yang, K. Durst, E. Spiecker, M. Göken: Microscopic study on the interfacial strength of hydrogenated amorphous carbon coating systems. Surface and Coatings Technology 205(11) (2011) 3429-3433

54. O. Franke, M. Göken, M.A. Meyers, K. Durst, A.M. Hodge: Dynamic nanoindentation of articular porcine cartilage. Materials Science and Engineering C 31 (4) (2011) 789-795

2010

53. B. Brandt, U. Lohbauer, M. Göken, K. Durst*: The influence of particle size on the mechanical properties of dental glass ionomer cements. Advanced Engineering Materials 12(12) (2010) B684-B689.

52. B. Brandt, C. Zollfrank, O. Franke, J. Fromm, M. Göken, K. Durst*: Micromechanics and ultrastructure of pyrolysed softwood cell walls, Acta Biomaterialia 6 (2010) 4345–4351

51. K. Durst, S. Hofmann, B. Backes, J. Müller, M. Göken: Microimprinting of nanocrystalline metals – Influence of microstructure and work hardening, Journal of Materials Processing Technology 210(13) (2010) 1787-1793

50. Y.-S. Jang, M. Jank, V. Maier, K. Durst, N. Travitzky, N., C. Zollfrank: SiC ceramic micropatterns from polycarbosilanes. Journal of the European Ceramic Society 30(13), (2010) 2773-2779

49. E. Nikulina, K. Durst, Göken, R. Völkl, U. Glatzel: Microstructural and micromechanical characterisation of a pt-al-cr-ni-re alloy by means of transmission electron microscopy and nanoindentation. International Journal of Materials Research, 101(5) (2010) 585-588.

2009

48. F. Ahmed, K. Durst*, S. Rosiwal, J. Fandrey, J. Schaufler, M. Göken: In-situ tensile testing of crystalline diamond coatings using raman spectroscopy. Surface and Coatings Technology 204 (6-7) (2009) 1022-1025

47. W. Blum, Y. Li, K. Durst: Stability of ultrafine-grained Cu to subgrain coarsening and recrystallization in annealing and deformation at elevated temperatures, Acta Materialia 57 (17) (2009) 5207-5217

46. P. Sadrabadi, K. Durst, M. Göken, W. Blum: Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits. Philosophical Magazine Letters 89 (2009) 391-398

45. H. Chilukuru, K. Durst, S. Wadekar, M. Schwienheer, A. Scholz, C. Berger, K.H. Mayer, W. Blum: Coarsening of precipitates and degradation of creep resistance in tempered martensite steels, Mat. Sci. Eng. A 510-511 (2009) 81 – 87

44. Y. Wang, K.-H. Mayer, A. Scholz, C. Berger, H. Chilukuru, K.Durst, W. Blum: Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650 °C, Mat. Sci. Eng. A 510-511 (2009) 180 – 184

43. B. Backes, Y.Y. Huang, M. Göken, K. Durst*: The correlation between the internal material length scale and the microstructure in nanoindentation experiments and simulations using the conventional mechanism strain gradient plasticity theory, J. Mater. Res. 24 (3) (2009) 1197 – 1207 (2009)

42. D. Kiener, K. Durst, M. Rester, A. Minor: Revealing Deformation Mechanisms with Nanoindentation, JOM 61 (3) 2009 14-23

41. O. Franke, K. Durst*, M. Göken: Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples, J. Mater. Res. 24 (3) (2009) 1127 – 1134

40. P. Sadrabadi, K. Durst*, M. Göken: Study on the indentation size effect in CaF2: Dislocation structure and hardness, Acta Materialia 57 (4) (2009) 1281-1289

39. B. Backes, K. Durst, D. Amberger, M. Göken: Particle Hardening in Creep Resistant Mg-Alloy MRI 230D Probed by Nanoindenting Atomic Force Microscopy, Mat Met Trans A 40 (2), (2009) 257-261

38. J. Schaufler, K. Durst, O. Massler, M. Göken: In-situ investigation on the deformation and damage behaviour of DLC coated thin films under uniaxial loading, Thin Solid Films 5127 (5) (2008) 1681 – 1685

37. J. Das, S. Pauly, M. Boström, K. Durst, M. Göken, J. Eckert: Designing bulk metallic glass and glass matrix composites in martensitic alloys, in press, Journal of Alloys and Compounds 483 (1-2) 97-101 (2009)

2008

36. S. Ndlovu, K. Durst, H.W. Hoeppel, M. Goeken: Study on the local damage mechanisms in WC-co hard metals during scratch testing. Materials Research Society Symposium Proceedings, 1049, (2008) 75-81.

35. K. Durst, M. Göken, G.M. Pharr: Indentation size effect in spherical and conical indentation, J. Phys. D: Appl. Phys. 41 (2008) 074005 (5pp)

34. K. Gelse, C. Mühle, O. Franke, J. Park, C. Mühle, M. Jehle, K. Durst, M. Göken, F. Hennig, K. v. d. Mark, H. Schneider: Cell-based resurfacing of large cartilage defects: long-term evaluation of grafts from autologous transgene-activated periosteal cells in a porcine model of osteoarthritis, Arthritis & Rheumatism 58 (2008) 475 – 488.

2007

33. K. Durst, O. Franke, A. Böhner, M. Göken: Indentation size effect in NiFe solid solutions, Acta Materialia 55 (2007) 6825 – 6833.

32. O. Franke, K. Durst, M. Göken: Microstructure and local mechanical properties of Pt-modified Nickelaluminides on nickel-base superalloys after thermo-mechanical fatigue, Mat. Sci. Eng. A 467 (2007) 15-23.

31. P. Wellmann, P. Hens, S.A. Sakwe, D. Queren, R. Müller, K. Durst, M. Göken; Impact of n-type versus p-type doping on mechanical properties and dislocation evolution during SiC crystal growth; Mater.Sci.Forum 556-557, (2007) 259-262.

30. O. Franke, K. Durst, V. Maier, M. Göken, T. Birkenholz, K. Gelse: Nanomechanical properties of hyaline and repair cartilage, Acta Biomaterialia 3, (2007) 873-881.

29. S. Ndlovu, K. Durst, M. Göken: Investigation of the wear properties of WC-Co hard metals using nanoscratch testing, available online, Wear 263 (2007) 1602 – 1609

2006

28. B. Backes, K. Durst, M. Göken: Determination of plastic properties of polycrystalline metallic materials by nanoindentation – experiments and finite element simulations, Phil. Mag. A 86 (2006) 5541–5551.

27. K. Durst, B. Backes, O. Franke, M. Göken: Indentation size effect in metallic materials: Modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations, Acta Materialia 54 (2006) 2547–2555.

26. H. Chilukuru, K. Durst, M. Göken, W. Blum: On the roles of M2X and Z-phase in tempered martensitic 9-12% Cr steels, in Materials for advanced power engineering, Proceedings of the 8th Liege Conference, J. Lecomte Berckers, M. Carton, F. Schubert, P. J. Ennis (Editors), Part III, (2006) 1181–1190.

25. T. Seibert, K. Durst, H. Chilukuru, M. Göken: Quantitative microstructural analysis on the stability of MX and M2X in 9-12% Cr steels by AFM, SEM and TEM in Materials for advanced power engineering, Proceedings of the 8th Liege Conference, J. Lecomte Berckers, M. Carton, F. Schubert, P. J. Ennis (Editors), Part III, (2006) 1241–1249.

24. J. Mueller, K. Durst, D. Amberger, M. Göken: Local investigations of the mechanical properties of ultrafine grained metals by nanoindentations, Materials Science Forum Vols. 503-504 (2006) 31-36.

2005

23. K. Durst, B. Backes, M. Göken: Determination of plastic properties of polycrystalline metallic materials by nanoindentation – experiments and finite element simulations, Mater. Res. Soc. Symp. Proc. Vol. 841, MRS Warrendale, (2005) R11.4.1-R11.4.6.

22. K. Durst, B. Backes, M. Göken: Indentation size effect in metallic materials: Correcting for the size of the plastic zone, Scripta. Mat. 52, 11 (2005) 1093-1097.

2004

21. K. Durst, M. Göken, H. Vehoff: Finite element study for nanoindentation measurements on two phase materials, J. Mater. Res. 19 (2004) 85-93.

20. K. Durst, M. Göken: Micromechanical characterization of the influence of Re on the mechanical properties in nickelbase superalloys, Mat. Sci. Eng. A 387-389, (2004), 312-316.

19. E. Schweitzer, K. Durst, D. Amberger and M. Göken: The mechanical properties in the vicinity of grain boundaries in ultrafine-grained and polycrystalline materials studied by nanoindentations, Materials Research Society Symp. Proc., Vol 821, MRS Warrendale, (2004) P4.9.1-P4.9.6.

18. K. Durst, O. Franke, M. Göken: Nanoindentations as a local probe for the mechanical properties and alloying influences in nickel-base superalloys and aluminide coatings, in Superalloys 2004, Eds.: K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S, Walston, The Minerals, Metals & Materials Society, (2004) 467-476.

2001 – 2003

17. K. Durst, M. Göken, G.M. Pharr: Finite element simulation of spherical indentation in the elastic-plastic transition, Z. Metallkd. 93 (2002) 857-861.

16. K. Durst , M. Göken: Quantitative Microstructural Characterisation by Atomic Force Microscopy and Electron Microscopy – A Comparative Study on the Superalloy Waspaloy, Prakt. Metallogr., 38 (2001), 197-215.

Conference proceedings and other publications

2010

15. K. Durst: Indentation size effect in crystalline materials, Habilitationsschrift, Universität Erlangen Nürnberg, 2010

2008

14. K. Durst: Mikrostrukturelle Untersuchungen zur Stabilität von MX und M2X Ausscheidungen in 9-12% Cr Stählen, Vortragsveranstaltung der AG warmfeste Stähle und Hochtemperaturwerkstoffe des VDEh, 2008

2007

13. K. Durst, B. Backes, M. Göken: Strain gradient plasticity modeling of size effects in plasticity, in Nonlocal Modeling of Materials Failure, NMMF 2007, Ed.: H. Yuan, F.H. Wittmann, ISBN 978-3-931681-87-6, Aedificatio publishers, Freiburg,Proceeding of an international workshop, (2007) 83-90.

12. K. Durst: Size effects observed during indentation testing, Invited Talk, 71st Annual Meeting of the DPG, 26.-30.03.2007, Regensburg

2006

11. Y. Wang, A. Scholz, C. Berger, K. H. Mayer, H. Chilukuru, K. Durst, W. Blum: Development of super heat resistant ferritic steels for environmental-friendly fossile-fired steam power plants with operating steam temperatures up to 650°C, in Vortragsreihe VDEH, 2006, Düsseldorf

2005

10. B. Backes, K. Durst, W. Blum, M. Göken: Charakterisierung der Mikrostruktur und Verformungskinetik von Magnesiumlegierungen mittels Rasterkraftmikroskopie und Nanoindentierung, Praktische Metallographie Sonderband 37, Ed.: M. Göken, Werkstoffinformationsgesellschaft mbH, (2005) 59-65.

9. T. Seibert, K. Durst, H. Chilukuru, W. Blum, M. Göken: Quantitative Gefügeanalyse von 9-12% Chromstählen mittels AFM, REM, TEM, Praktische Metallographie Sonderband 37, Ed.: M. Göken, Werkstoffinformationsgesellschaft mbH, (2005) 73-79.

2004

8. K. Durst, M. Göken: Nanoindentierung – Eine Sonde für die lokalen mechanischen Eigenschaften, Praktische Metallographie Sonderband 36, Ed.: M. Pohl, Werkstoffinformationsgesellschaft mbH, (2004) 319.

7. K. Durst, O. Franke, H. W. Höppel, E.E. Affeldt, M. Göken: Mikrostruktur und lokale mechanische Eigenschaften von platinmodifizierten Aluminidschichten auf Nickelbasis- Superlegierungen nach thermomechanischer Ermüdung, Praktische Metallographie Sonderband 36, Ed.: M. Pohl, Werkstoffinformationsgesellschaft mbH, (2004) 117-122.

6. M. Göken, R. Magerle, M. Hund, K. Durst: Nanotomographie metallischer Gefüge, Praktische Metallographie Sonderband 35, Metallographietagung Berlin 2003, (Ed.) P.D. Portella, Werkstoff-Informationgesellschaft mbH, Frankfurt (2004), 257-262.

2000-2003

5. K. Durst: Mikrostrukturelle und mikromechanische Charakterisierung ausscheidungsgehärteter Werkstoffe mit der nanoindentierenden Rasterkraftmikroskopie, Der Andere Verlag Osnabrück, ISBN 3-89959-129-1 (2003)

4. K. Durst, F. Pyczak, H. Biermann, M. Göken, H. Mughrabi, H. Vehoff: Microstructural and micromechanical characterisation of nickel-base superalloys by CBED and nanoindentation investigations, in MATERIALS WEEK 2002 – Proceedings, Ed. Werkstoffwoche-Partnerschaft, Publisher: Werkstoff-Informationsgesellschaft mbH, Frankfurt (2002).

3. M. Göken, K. Durst, H. Vehoff, U. Ilg: Vergleichende Gefügecharakterisierung von Zirkaloy-Hüllrohren mit dem Rasterkraftmikroskop und Rasterelektronenmikroskop, Praktische Metallographie Sonderband 33, Ed.: Portella P.D., Werkstoffinformationsgesellschaft mbH. Frankfurt, (2002), 215.

2. N. Ilic, M. Göken, M. Kempf, K. Durst, F. Soldera, N.Manent, F. Mücklich: Atomic Force Microscopy Study of Ru-Al Eutectic, Praktische Metallographie Sonderband 32, Proceedings Euromet 2000, (Eds.) F. Mücklich, Werkstoffinformationsgesellschaft mbH Frankfurt, (2000), 103-106.

1. M. Göken, K. Durst, H. Vehoff: Combination of atomic force microscopy and electron micorscopy for quantitative characterizations of precipiate distributions, Praktische Metallographie Sonderband. 32, Mücklich, F. (ed.), Werkstoff-Informationsgesellschaft mbH, Frankfurt, (2000), 91-94